Commit aed4afa0 authored by ROOL's avatar ROOL 🤖
Browse files

This commit was manufactured by cvs2git to create tag 'ABRelease-0_37'.

Sprout from master 2012-05-03 08:24:01 UTC Robert Sprowson <rsprowson@gitlab.riscosopen.org> 'TextGadget and UnSqzAIF added to installer script.'
Delete:
    Resources/OMAP3Live/ReadMe.txt
    Resources/OMAP3Live/clean,feb
    Resources/OMAP3Live/release_autobuild,feb
    Resources/S3CDev/InstallHD4,fd6
    Resources/S3CDev/ReadMe.txt
    Resources/S3CDev/clean,feb
    Resources/S3CDev/release_autobuild,feb
parent 7d20a1f7
RISC OS Open Release Archive
============================
This is the OMAP (Beagle Board) 'Live' ROM image. It is a bleeding-edge build
which comes from the latest revisions of all the relevant sources in our source
code repository and is completely untested.
Using this ROM image in your Beagle should only be done if you are confident
that you know what you are doing! It is likely to be functionally incomplete
and probably unstable in various ways.
Some components in this archive are released under the licence (included in
this archive as Licence_v1.pdf), or see:
http://www.castle-technology.co.uk/riscosbaselicence.htm
How to install the ROM image
============================
The easiest way to install the ROM image onto an SD card is to use the
included !SDCreate application. If you have the RISC OS 5 USB mass storage
drivers then !SDCreate can write the image straight to an SD card.
Alternatively you can create a disc image file which can then be written to a
card using any ordinary Windows/Linux/Mac PC. For more information, including
a description of the SD card structure, see the !SDCreate help file or the
RISC OS Open wiki:
http://www.riscosopen.org/wiki/documentation/pages/Using+the+Cortex-A8+port
An important note about CMOS RAM
================================
The OMAP port of RISC OS now supports saving configuration settings in a CMOS memory chip so that they are kept when the power is turned off. This requires a small carrier board to be plugged in, which you can obtain for a few pounds from your favourite supplier.
If this carrier board is not detected it is possible to have 'read only' settings in one of two ways
* Add a CMOS file to the SD card
Make any configuration settings changes desired than use the *SaveCMOS
command to capture them in a file, put this file on the SD card alongside
the RISC OS ROM image.
For more information about how the CMOS file is handled, please see
the !SDCreate help file.
* Do nothing
If the hardware is not present, and you haven't put a CMOS file on the
SD card, you'll get the built in defaults.
-- RISC OS Open
| Copyright 2012 Castle Technology Ltd
|
| Licensed under the Apache License, Version 2.0 (the "License");
| you may not use this file except in compliance with the License.
| You may obtain a copy of the License at
|
| http://www.apache.org/licenses/LICENSE-2.0
|
| Unless required by applicable law or agreed to in writing, software
| distributed under the License is distributed on an "AS IS" BASIS,
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
| See the License for the specific language governing permissions and
| limitations under the License.
|
| Set up and/or override some system variables
Set ab_local$zip rom-omap3-live/zip
| Remove any old crud from our resources directory
x Wipe <ab_res$dir>.zip ~cfr~v
Remove <ab_res$dir>.<ab_local$zip>
\ No newline at end of file
| Copyright 2012 Castle Technology Ltd
|
| Licensed under the Apache License, Version 2.0 (the "License");
| you may not use this file except in compliance with the License.
| You may obtain a copy of the License at
|
| http://www.apache.org/licenses/LICENSE-2.0
|
| Unless required by applicable law or agreed to in writing, software
| distributed under the License is distributed on an "AS IS" BASIS,
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
| See the License for the specific language governing permissions and
| limitations under the License.
|
| If there is no ROM image (e.g. the build failed), exit here
IfThere <Build$Dir>.Images.<Build$ImageName> Then Else Obey
| Run our clean script
Run <ab_res$dir>.clean
| Create an empty directory to hold the files that will be zipped up
CDir <ab_res$dir>.zip
| Copy the Castle licence file into the zip directory
Copy ab_res:Licence_v1/pdf <ab_res$dir>.zip.Licence_v1/pdf ~cf~r~v
| Copy the ReadMe for this build into the zip directory
Copy ab_res:ReadMe/txt <ab_res$dir>.zip.ReadMe/txt ~cf~r~v
| Compress the ROM image into the zip directory
Do rompress -vZ <Build$Dir>.Images.<Build$ImageName> <ab_res$dir>.zip.riscos
| Copy !SDCreate into the zip directory
Copy <Install$Dir>.ABRelease.!SDCreate <ab_res$dir>.zip.!SDCreate ~cfr~v
| Set the zip directory as the current directory
Dir <ab_res$dir>.zip
| Create a zip archive with the required files in it
Do zip -9qr ^.<ab_local$zip> *
| Return the CSD to its original state
Back
| Delete any pre-existing zip archive on the autobuild server
Remove <ab_zip$file>
| Copy the template zip archive onto the autobuild server
SetType <ab_res$dir>.<ab_local$zip> &A91
Copy <ab_res$dir>.<ab_local$zip> <ab_zip$file> ~cfr~v
Access <ab_zip$file> rw/r
\ No newline at end of file
scsi
basic
10REM Turn off alignment exceptions on ARMv7 machines
20DIM code% 256
30P%=code%
40[ OPT 0
50SWI "OS_EnterOS"
60MRC CP15,0,R0,C1,C0,0
70BIC R0,R0,#2
80MCR CP15,0,R0,C1,C0,0
90MSR CPSR_c,#&10
100MOV PC,R14
110]
120CALL code%
*changedynamicarea -ramfssize 32m
*ram
SAVE"RAM::RamDisc0.$.AOff"
10REM Turn on alignment exceptions on ARMv7 machines
70ORR R0,R0,#2
SAVE"RAM::RamDisc0.$.AOn"
*scsi
NEW
10REM Create and save a text file of instructions
20:
30REM Assumes a RAM disc is present
40:
50ONERRORCLOSE#x:REPORT:PRINT" at line ";ERL:END
60READline$
70x=OPENOUT"RAM::RamDisc0.$.HD4Instruct"
80WHILE line$<>""
90BPUT#x,line$
100READline$
110ENDWHILE
120CLOSE#x
130*settype RAM::RamDisc0.$.HD4instruct &fff
140END
150:
1000DATA" Creating your HardDisc4 boot disc"
1010DATA" ================================="
1020DATA" "
1030DATA"1. Connect the new device you want to format, and"
1040DATA" note its drive number on the icon bar."
1050DATA"2. Unplug the FAT formatted device you used to get"
1060DATA" to this point, if you wish."
1070DATA"3. To reformat this new device, run HForm from"
1080DATA" its shortcut placed on the Pinboard."
1090DATA"4. In the RAM::RamDisc0.$.HardDisc4 directory"
1100DATA" display, click Menu -> Select all."
1110DATA"5. Drag the selection onto the iconbar drive icon"
1120DATA" for the newly formatted device."
1130DATA"6. When copying is complete (i.e. Copying files"
1140DATA" window disappears), click Menu -> Dismount on"
1150DATA" the iconbar drive icon."
1160DATA"7. You are now free to restart the machine, which"
1170DATA" will boot from the newly installed HardDisc4"
1180DATA" !Boot sequence."
1190DATA""
RUN
NEW
10REM Run self-extracting HardDisc4 image
20REM which provides the !Boot sequence and
30REM FileCore formatter
40:
50REM Assumes a RAM disc of minimum size 32MB is present
60:
70*copy SCSI::0.HardDisc4/util RAM::RamDisc0.$.HD4 ~c
80*dismount :0
90*settype RAM::RamDisc0.$.HD4 &ffc
100*key0|m*delete RAM::RamDisc0.$.HD4|m*pin RAM::RamDisc0.$.HardDisc4.Utilities.Caution.!HForm 32 152|m*filer_opendir RAM::RamDisc0.$|m*filer_opendir RAM::RamDisc0.$.HardDisc4|m*filer_run RAM::RamDisc0.$.HD4instruct|m
110*key1|m|m|m|m|m|mREM **********************|mREM * Finished. *|mREM * You may safely *|mREM * CLOSE this window. *|mREM **********************|m|mQUIT|mshellcli_taskquit|m
120*fx15,0
130*fx138,0,128
140*fx138,0,129
150*ram
160*/ RAM::RamDisc0.$.HD4
RUN
RISC OS Open Release Archive
============================
This is the S3C2440/S3C6410 development ROM image. It is a bleeding-edge
build which comes from the latest revisions of all the relevant sources in
our source code repository and is completely untested.
Using this ROM image in your machine should only be done if you are confident
that you know what you are doing! It is likely to be functionally incomplete
and probably unstable in various ways.
Some components in this archive are released under the licence (included in
this archive as Licence_v1.pdf), or see:
http://www.castle-technology.co.uk/riscosbaselicence.htm
-- RISC OS Open
| Copyright 2012 Castle Technology Ltd
|
| Licensed under the Apache License, Version 2.0 (the "License");
| you may not use this file except in compliance with the License.
| You may obtain a copy of the License at
|
| http://www.apache.org/licenses/LICENSE-2.0
|
| Unless required by applicable law or agreed to in writing, software
| distributed under the License is distributed on an "AS IS" BASIS,
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
| See the License for the specific language governing permissions and
| limitations under the License.
|
| Set up and/or override some system variables
Set ab_local$zip rom-s3c-dev/zip
| Remove any old crud from our resources directory
x Wipe <ab_res$dir>.zip ~cfr~v
Remove <ab_res$dir>.<ab_local$zip>
| Copyright 2012 Castle Technology Ltd
|
| Licensed under the Apache License, Version 2.0 (the "License");
| you may not use this file except in compliance with the License.
| You may obtain a copy of the License at
|
| http://www.apache.org/licenses/LICENSE-2.0
|
| Unless required by applicable law or agreed to in writing, software
| distributed under the License is distributed on an "AS IS" BASIS,
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
| See the License for the specific language governing permissions and
| limitations under the License.
|
| If there is no ROM image (e.g. the build failed), exit here
IfThere <Build$Dir>.Images.<Build$ImageName> Then Else Obey
| Run our clean script
Run <ab_res$dir>.clean
| Create an empty directory to hold the files that will be zipped up
CDir <ab_res$dir>.zip
| Copy the Castle licence file into the zip directory
Copy ab_res:Licence_v1/pdf <ab_res$dir>.zip.Licence_v1/pdf ~cf~r~v
| Copy the ReadMe for this build into the zip directory
Copy ab_res:ReadMe/txt <ab_res$dir>.zip.ReadMe/txt ~cf~r~v
| Compress the ROM image into the zip directory
Do rompress -vZ <Build$Dir>.Images.<Build$ImageName> <ab_res$dir>.zip.riscos
| Copy !SDCreate into the zip directory
Copy <Install$Dir>.ABRelease.!SDCreate <ab_res$dir>.zip.!SDCreate ~cfr~v
| Copy the InstallHD4 script into the zip directory
Copy ab_res:InstallHD4 <ab_res$dir>.zip.InstallHD4 ~cf~r~v
| Set the zip directory as the current directory
Dir <ab_res$dir>.zip
| Create a zip archive with the required files in it
Do zip -9qr ^.<ab_local$zip> *
| Return the CSD to its original state
Back
| Delete any pre-existing zip archive on the autobuild server
Remove <ab_zip$file>
| Copy the template zip archive onto the autobuild server
SetType <ab_res$dir>.<ab_local$zip> &A91
Copy <ab_res$dir>.<ab_local$zip> <ab_zip$file> ~cfr~v
Access <ab_zip$file> rw/r
\ No newline at end of file
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment