Turn on E2ROMSupport switch for machine ARM11ZF

Detail:
  This is necessary to enable the Raspberry Pi HAL to provide non-volatile RAM.
Admin:
  Tested on Raspberry Pi

Version 2.10. Tagged as 'HdrSrc-2_10'

VersionNum

-/* (2.09)
+/* (2.10)
  *
  * This file is automatically maintained by srccommit, do not edit manually.
  * Last processed by srccommit version: 1.1.
  *
  */
-#define Module_MajorVersion_CMHG        2.09
+#define Module_MajorVersion_CMHG        2.10
 #define Module_MinorVersion_CMHG        
-#define Module_Date_CMHG                14 Jul 2012
+#define Module_Date_CMHG                15 Jul 2012
 
-#define Module_MajorVersion             "2.09"
-#define Module_Version                  209
+#define Module_MajorVersion             "2.10"
+#define Module_Version                  210
 #define Module_MinorVersion             ""
-#define Module_Date                     "14 Jul 2012"
+#define Module_Date                     "15 Jul 2012"
 
-#define Module_ApplicationDate          "14-Jul-12"
+#define Module_ApplicationDate          "15-Jul-12"
 
 #define Module_ComponentName            "HdrSrc"
 #define Module_ComponentPath            "castle/RiscOS/Sources/Programmer/HdrSrc"
 
-#define Module_FullVersion              "2.09"
-#define Module_HelpVersion              "2.09 (14 Jul 2012)"
-#define Module_LibraryVersionInfo       "2:9"
+#define Module_FullVersion              "2.10"
+#define Module_HelpVersion              "2.10 (15 Jul 2012)"
+#define Module_LibraryVersionInfo       "2:10"

hdr/Machine/Machine

@@ -235,7 +235,7 @@ ExtROMis16bit   SETL    M_Falcon :LOR: M_Peregrine :LOR: M_STB3 :LOR: M_STB400
 ; E2ROM is supported at i2c addresses >= A8 in addition to normal CMOS RAM
 ; Note that this also controls HAL NVRAM support, and RTCSupport.
                 GBLL    E2ROMSupport
-E2ROMSupport    SETL    M_Falcon :LOR: M_Omega :LOR: M_Peregrine :LOR: M_STB3 :LOR: M_STB400 :LOR: M_STB5 :LOR: M_Lazarus :LOR: M_32 :LOR: M_Tungsten :LOR: M_CortexA8 :LOR: M_CortexA9
+E2ROMSupport    SETL    M_Falcon :LOR: M_Omega :LOR: M_Peregrine :LOR: M_STB3 :LOR: M_STB400 :LOR: M_STB5 :LOR: M_Lazarus :LOR: M_32 :LOR: M_Tungsten :LOR: M_ARM11ZF :LOR: M_CortexA8 :LOR: M_CortexA9
 
 ; Should we probe IIC addresses &A0 and &D0 for an RTC? (Requires E2ROMSupport, else Phillips RTC at &A0 is assumed)
 ; Disabling this is useful for HAL platforms that use the HAL RTC API