; Copyright 2016 Castle Technology Ltd
;
; Licensed under the Apache License, Version 2.0 (the "License");
; you may not use this file except in compliance with the License.
; You may obtain a copy of the License at
;
; http://www.apache.org/licenses/LICENSE-2.0
;
; Unless required by applicable law or agreed to in writing, software
; distributed under the License is distributed on an "AS IS" BASIS,
; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
; See the License for the specific language governing permissions and
; limitations under the License.
;
; > Exceptions
; +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
;
; Exception veneers
[ AMB_LazyMapIn
; Instruction fetch abort pre-veneer, just to field possible lazy AMB aborts
;
PAbPreVeneer ROUT
Push "r0-r7, lr" ; wahey, we have an abort stack
SUB r0, lr_abort, #4 ; aborting address
MOV r2, #1
BL AMB_LazyFixUp ; can trash r0-r7, returns NE status if claimed and fixed up
PageTableSyncNE
Pull "r0-r7, lr", NE ; restore regs and
SUBNES pc, lr_abort, #4 ; restart aborting instruction if fixed up
LDR lr, [sp, #8*4] ; (not a lazy abort) restore lr
LDR r0, =ZeroPage+PAbHan ; we want to jump to PAb handler, in abort mode
LDR r0, [r0]
STR r0, [sp, #8*4]
Pull "r0-r7, pc"
]
; Preliminary layout of abort indirection nodes
^ 0
AI_Link # 4
AI_Low # 4
AI_High # 4
AI_WS # 4
AI_Addr # 4
EXPORT DAbPreVeneer
DAbPreVeneer ROUT
SUB r13_abort, r13_abort, #17*4 ; we use stacks, dontcherknow
STMIA r13_abort, {r0-r7} ; save unbanked registers anyway
STR lr_abort, [r13_abort, #15*4] ; save old PC, ie instruction address
MyCLREX r0, r1 ; Exclusive monitor is in unpredictable state "after taking a data abort", clear it here
[ MEMM_Type = "VMSAv6"
; Fixup code for MVA-based cache/TLB ops, which can abort on ARMv7 if the specified MVA doesn't have a mapping.
; Must come before AMBControl, else things can go very wrong during OS_ChangeDynamicArea
; MVA cache ops have the form coproc=p15, CRn=c7, opc1=0, opc2=1
; MVA TLB ops have the form coproc=p15, CRn=c8, opc1=0, opc2=1
; Note that some non-MVA ops also follow the above rules - at the moment we make no attempt to filter those false-positives out
; This code is also written from the perspective of running on an ARMv7 CPU - behaviour under ARMv6 hasn't been checked!
; Also, as wrong as it seems, attempting to load the aborting instruction could trigger an abort (something wrong with the prefetch handler? or cache flushes not being done properly?)
; So this code must protect DFAR, DFSR, spsr_abort, and lr_abort from being clobbered
; We also need to be careful about how AMBControl will react to the abort:
; If DFAR and lr_abort both point to the same page, when we try loading the instruction (and it triggers an abort), AMBControl will map in the page
; So when control returns to us (and we determine that it wasn't an MVA op) AMBControl will be called again (for DFAR), see that the page is mapped in, and claim that it's a real abort instead of the lazy fixup that it really is
; (The workaround for that issue probably makes the DFAR, DFSR, spsr_abort, lr_abort saving irrelevant, but it's better to be safe than sorry)
CMP lr, #AplWorkMaxSize ; Assume that MVA ops won't come from application space (cheap workaround for above-mentioned AMBControl issue)
BLO %FT10
MRS r1, SPSR
TST r1, #T32_bit
BNE %FT10 ; We don't cope with Thumb ATM. Should really check for Jazelle too!
MOV r2, lr ; LR is already saved on the stack, but we can't load from it because any recursive abort won't have a clue what address we're trying to access.
; Protect DFAR, DFSR
ARM_read_FAR r3
ARM_read_FSR r4
LDR r0, [r2, #-8] ; Get aborting instruction
MSR SPSR_cxsf, r1 ; un-clobber SPSR, FAR, FSR
ARM_write_FAR r3
ARM_write_FSR r4
CMP r0, #&F0000000
BHS %FT10 ; Ignore cc=NV, which is MCR2 encoding
BIC r0, r0, #&F000000F ; Mask out the uninteresting bits
BIC r0, r0, #&0000F000
EOR r0, r0, #&0E000000 ; Desired value, minus CRn
EOR r0, r0, #&00000F30
CMP r0, #&00070000 ; CRn=c7?
CMPNE r0, #&00080000 ; CRn=c8?
BNE %FT10 ; It's not an MVA-based op
MOV lr_abort, r2 ; un-clobber LR (doesn't need un-clobbering if it wasn't an MVA op)
LDMIA r13_abort, {r0-r4} ; Restore the regs we intentionally clobbered
ADD r13_abort, r13_abort, #17*4
SUBS pc, lr_abort, #4 ; Resume execution at the next instruction
10
]
[ AMB_LazyMapIn
ARM_read_FAR r0 ; aborting address
MOV r2, #0
BL AMB_LazyFixUp ; can trash r0-r7, returns NE status if claimed and fixed up
PageTableSyncNE
LDR lr_abort, [r13_abort, #15*4] ; restore lr_abort
LDMIA r13_abort, {r0-r7} ; restore regs
ADDNE r13_abort, r13_abort, #17*4 ; if fixed up, restore r13_abort
SUBNES pc, lr_abort, #8 ; and restart aborting instruction
]
MRS r0, SPSR ; r0 = PSR when we aborted
MRS r1, CPSR ; r1 = CPSR
ADD r2, r13_abort, #8*4 ; r2 -> saved register bank for r8 onwards
LDR r4, =ZeroPage+Abort32_dumparea+3*4 ;use temp area (avoid overwriting main area for expected aborts)
ARM_read_FAR r3
STMIA r4, {r0,r3,lr_abort} ; dump 32-bit PSR, fault address, 32-bit PC
MOV r4, lr_abort ; move address of aborting instruction into an unbanked register
BIC r1, r1, #&1F ; knock out current mode bits
ANDS r3, r0, #&1F ; extract old mode bits (and test for USR26_mode (=0))
TEQNE r3, #USR32_mode ; if usr26 or usr32 then use ^ to store registers
[ SASTMhatbroken
STMEQIA r2!,{r8-r12}
STMEQIA r2 ,{r13,r14}^
SUBEQ r2, r2, #5*4
|
STMEQIA r2, {r8-r14}^
]
BEQ %FT05
ORR r3, r3, r1 ; and put in user's
MSR CPSR_c, r3 ; switch to user's mode
STMIA r2, {r8-r14} ; save the banked registers
MRS r5, SPSR ; get the SPSR for the aborter's mode
STR r5, [r2, #8*4] ; and store away in the spare slot on the end
; (this is needed for LDM with PC and ^)
ORR r1, r1, #ABT32_mode
MSR CPSR_c, r1 ; back to abort mode for the rest of this
05
Push "r0" ; save SPSR_abort
[ SASTMhatbroken
SUB sp, sp, #3*4
STMIA sp, {r13,r14}^ ; save USR bank in case STM ^, and also so we can corrupt them
NOP
STMDB sp!, {r8-r12}
|
SUB sp, sp, #8*4 ; make room for r8_usr to r14_usr and PC
STMIA sp, {r8-r15}^ ; save USR bank in case STM ^, and also so we can corrupt them
]
SUB r11, r2, #8*4 ; r11 -> register bank
STR r4, [sp, #7*4] ; store aborter's PC in user register bank
; Call normal exception handler
90
; copy temp area to real area (we believe this is an unexpected data abort now)
LDR r0, =ZeroPage+Abort32_dumparea
LDR r1, [r0,#3*4]
STR r1, [r0]
LDR r1, [r0,#4*4]
STR r1, [r0,#4]
LDR r1, [r0,#5*4]
STR r1, [r0,#2*4]
LDR r0, =ZeroPage ; we're going to call abort handler
[ ZeroPage = 0
STR r0, [r0, #CDASemaphore] ; so allow recovery if we were in CDA
|
MOV r2, #0
STR r2, [r0, #CDASemaphore] ; so allow recovery if we were in CDA
]
LDR r0, [r0, #DAbHan] ; get address of data abort handler
ADD r2, r11, #8*4 ; point r2 at 2nd half of main register bank
LDMIA sp, {r8-r14}^ ; reload user bank registers
NOP ; don't access banked registers after LDM^
ADD sp, sp, #9*4 ; junk user bank stack frame + saved SPSR
MRS r1, CPSR
MRS r6, SPSR ; get original SPSR, with aborter's original mode
AND r7, r6, #&0F
TEQ r7, #USR26_mode ; also matches USR32
LDMEQIA r2, {r8-r14}^ ; if user mode then just use ^ to reload registers
NOP
BEQ %FT80
ORR r6, r6, #I32_bit ; use aborter's flags and mode but set I
BIC r6, r6, #T32_bit ; and don't set Thumb
MSR CPSR_c, r6 ; switch to aborter's mode
LDMIA r2, {r8-r14} ; reload banked registers
MSR CPSR_c, r1 ; switch back to ABT32
80
STR r0, [r13_abort, #16*4] ; save handler address at top of stack
LDR lr_abort, [r13_abort, #15*4] ; get abort address back in R14
LDMIA r13_abort, {r0-r7} ; reload r0-r7
ADD r13_abort, r13_abort, #16*4 ; we use stacks, dontcherknow
Pull pc
END