; Copyright 1996 Acorn Computers Ltd
;
; Licensed under the Apache License, Version 2.0 (the "License");
; you may not use this file except in compliance with the License.
; You may obtain a copy of the License at
;
; http://www.apache.org/licenses/LICENSE-2.0
;
; Unless required by applicable law or agreed to in writing, software
; distributed under the License is distributed on an "AS IS" BASIS,
; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
; See the License for the specific language governing permissions and
; limitations under the License.
;
; > ARM600
GBLL DebugAborts
DebugAborts SETL {FALSE}
; Convert given page flags to the equivalent temp uncacheable L2PT flags
; n.b. temp not used here but included for VMSAv6 compatibility
MACRO
GetTempUncache $out, $pageflags, $pcbtrans, $temp
ASSERT $out <> $pageflags ; For consistency with VMSAv6 version
ASSERT $out <> $pcbtrans
[ "$temp" <> ""
ASSERT $out <> $temp ; For consistency with VMSAv6 version
ASSERT $temp <> $pcbtrans ; For consistency with VMSAv6 version
]
ASSERT DynAreaFlags_CPBits = 7*XCB_P :SHL: 10
ASSERT DynAreaFlags_NotCacheable = XCB_NC :SHL: 4
ASSERT DynAreaFlags_NotBufferable = XCB_NB :SHL: 4
AND $out, $pageflags, #DynAreaFlags_NotCacheable + DynAreaFlags_NotBufferable
ORR $out, $out, #DynAreaFlags_NotCacheable ; treat as temp uncache
LDRB $out, [$pcbtrans, $out, LSR #4] ; convert to X, C and B bits for this CPU
MEND
TempUncache_L2PTMask * L2_X+L2_C+L2_B
; MMU interface file - ARM600 version
KEEP
; **************** CAM manipulation utility routines ***********************************
; **************************************************************************************
;
; BangCamUpdate - Update CAM, MMU for page move, coping with page currently mapped in
;
; mjs Oct 2000
; reworked to use generic ARM ops (vectored to appropriate routines during boot)
;
; First look in the CamEntries table to find the logical address L this physical page is
; currently allocated to. Then check in the Level 2 page tables to see if page L is currently
; at page R2. If it is, then map page L to be inaccessible, otherwise leave page L alone.
; Then map logical page R3 to physical page R2.
;
; in: r2 = physical page number
; r3 = logical address (2nd copy if doubly mapped area)
; r9 = offset from 1st to 2nd copy of doubly mapped area (either source or dest, but not both)
; r11 = PPL + CB bits
;
; out: r0, r1, r4, r6 corrupted
; r2, r3, r5, r7-r12 preserved
;
BangCamUpdate ROUT
TST r11, #DynAreaFlags_DoublyMapped ; if moving page to doubly mapped area
SUBNE r3, r3, r9 ; then CAM soft copy holds ptr to 1st copy
LDR r1, =ZeroPage
LDR r1, [r1, #CamEntriesPointer]
ADD r1, r1, r2, LSL #CAM_EntrySizeLog2 ; point at cam entry (logaddr, PPL)
ASSERT CAM_LogAddr=0
ASSERT CAM_PageFlags=4
LDMIA r1, {r0, r6} ; r0 = current logaddress, r6 = current PPL
BIC r4, r11, #PageFlags_Unsafe
STMIA r1, {r3, r4} ; store new address, PPL
Push "r0, r6" ; save old logical address, PPL
LDR r1, =ZeroPage+PhysRamTable ; go through phys RAM table
MOV r6, r2 ; make copy of r2 (since that must be preserved)
10
LDMIA r1!, {r0, r4} ; load next address, size
SUBS r6, r6, r4, LSR #12 ; subtract off that many pages
BCS %BT10 ; if more than that, go onto next bank
ADD r6, r6, r4, LSR #12 ; put back the ones which were too many
ADD r0, r0, r6, LSL #12 ; move on address by the number of pages left
LDR r6, [sp] ; reload old logical address
; now we have r6 = old logical address, r2 = physical page number, r0 = physical address
TEQ r6, r3 ; TMD 19-Jan-94: if old logaddr = new logaddr, then
BEQ %FT20 ; don't remove page from where it is, to avoid window
; where page is nowhere.
LDR r1, =L2PT
ADD r6, r1, r6, LSR #10 ; r6 -> L2PT entry for old log.addr
MOV r4, r6, LSR #12 ; r4 = word offset into L2 for address r6
LDR r4, [r1, r4, LSL #2] ; r4 = L2PT entry for L2PT entry for old log.addr
TST r4, #3 ; if page not there
BEQ %FT20 ; then no point in trying to remove it
LDR r4, [r6] ; r4 = L2PT entry for old log.addr
MOV r4, r4, LSR #12 ; r4 = physical address for old log.addr
TEQ r4, r0, LSR #12 ; if equal to physical address of page being moved
BNE %FT20 ; if not there, then just put in new page
AND r4, r11, #PageFlags_Unsafe
Push "r0, r3, r11, r14" ; save phys.addr, new log.addr, new PPL, lr
ADD r3, sp, #4*4
LDMIA r3, {r3, r11} ; reload old logical address, old PPL
LDR r0, =DuffEntry ; Nothing to do if wasn't mapped in
ORR r11, r11, r4
TEQ r3, r0
MOV r0, #0 ; cause translation fault
BLNE BangL2PT ; map page out
Pull "r0, r3, r11, r14"
20
ADD sp, sp, #8 ; junk old logical address, PPL
B BangCamAltEntry ; and branch into BangCam code
; **************************************************************************************
;
; BangCam - Update CAM, MMU for page move, assuming page currently mapped out
;
; This routine maps a physical page to a given logical address
; It is assumed that the physical page is currently not mapped anywhere else
;
; in: r2 = physical page number
; r3 = logical address (2nd copy if doubly mapped)
; r9 = offset from 1st to 2nd copy of doubly mapped area (either source or dest, but not both)
; r11 = PPL
;
; out: r0, r1, r4, r6 corrupted
; r2, r3, r5, r7-r12 preserved
;
; NB The physical page number MUST be in range.
BangCam ROUT
TST r11, #DynAreaFlags_DoublyMapped ; if area doubly mapped
SUBNE r3, r3, r9 ; then move ptr to 1st copy
LDR r1, =ZeroPage+PhysRamTable ; go through phys RAM table
MOV r6, r2 ; make copy of r2 (since that must be preserved)
10
LDMIA r1!, {r0, r4} ; load next address, size
SUBS r6, r6, r4, LSR #12 ; subtract off that many pages
BCS %BT10 ; if more than that, go onto next bank
ADD r6, r6, r4, LSR #12 ; put back the ones which were too many
ADD r0, r0, r6, LSL #12 ; move on address by the number of pages left
BangCamAltEntry
LDR r4, =DuffEntry ; check for requests to map a page to nowhere
TEQ r4, r3 ; don't actually map anything to nowhere
MOVEQ pc, lr
GetPTE r0, 4K, r0, r11
LDR r1, =L2PT ; point to level 2 page tables
;fall through to BangL2PT
;internal entry point for updating L2PT entry
;
; entry: r0 = new L2PT value, r1 -> L2PT, r3 = logical address (4k aligned), r11 = PPL
;
; exit: r0,r1,r4,r6 corrupted
;
BangL2PT ; internal entry point used only by BangCamUpdate
Push "lr"
MOV r6, r0
TST r11, #PageFlags_Unsafe
BNE %FT30
TST r11, #DynAreaFlags_DoublyMapped
BNE BangL2PT_sledgehammer ;if doubly mapped, don't try to be clever
;In order to safely map out a cacheable page and remove it from the
;cache, we need to perform the following process:
;* Make the page uncacheable
;* Flush TLB
;* Clean+invalidate cache
;* Write new mapping (r6)
;* Flush TLB
;For uncacheable pages we can just do the last two steps
;
TEQ r6, #0 ;EQ if mapping out
TSTEQ r11, #DynAreaFlags_NotCacheable ;EQ if also cacheable (overcautious for temp uncache+illegal PCB combos)
LDR r4, =ZeroPage
BNE %FT20
LDR lr, [r4, #MMU_PCBTrans]
GetTempUncache r0, r11, lr
LDR lr, [r1, r3, LSR #10] ;get current L2PT entry
BIC lr, lr, #TempUncache_L2PTMask ;remove current attributes
ORR lr, lr, r0
STR lr, [r1, r3, LSR #10] ;Make uncacheable
MOV r0, r3
ARMop MMU_ChangingUncachedEntry,,, r4 ; TLB flush
MOV r0, r3
ADD r1, r3, #4096
ARMop Cache_CleanInvalidateRange,,, r4 ; Cache flush
LDR r1, =L2PT
20 STR r6, [r1, r3, LSR #10] ;update L2PT entry
Pull "lr"
MOV r0, r3
ARMop MMU_ChangingUncachedEntry,,tailcall,r4
BangL2PT_sledgehammer
;sledgehammer is super cautious and does cache/TLB coherency on a global basis
;should only be used for awkward cases
;
TEQ r6, #0 ;EQ if mapping out
TSTEQ r11, #DynAreaFlags_NotCacheable ;EQ if also cacheable (overcautious for temp uncache+illegal PCB combos)
ADR lr, %FT30
LDR r4, =ZeroPage
ARMop MMU_Changing, EQ, tailcall, r4
ARMop MMU_ChangingUncached, NE, tailcall, r4
30 STR r6, [r1, r3, LSR #10]! ; update level 2 page table (and update pointer so we can use bank-to-bank offset
TST r11, #DynAreaFlags_DoublyMapped ; if area doubly mapped
STRNE r6, [r1, r9, LSR #10] ; then store entry for 2nd copy as well
ADDNE r3, r3, r9 ; and point logical address back at 2nd copy
Pull "pc"
[ ARM6support
PPLTransARM6
& (AP_Full * L2_APMult) + L2_SmallPage ; R any W any
& (AP_Read * L2_APMult) + L2_SmallPage ; R any W sup
& (AP_None * L2_APMult) + L2_SmallPage ; R sup W sup
& (AP_Read * L2_APMult) + L2_SmallPage ; R any W sup
PPLAccessARM6 ; EL1EL0
; RWXRWX
GenPPLAccess 2_111111
GenPPLAccess 2_111101
GenPPLAccess 2_111000
GenPPLAccess 2_111101
DCD -1
]
PPLTrans
& (AP_Full * L2_APMult) + L2_SmallPage ; R any W any
& (AP_Read * L2_APMult) + L2_SmallPage ; R any W sup
& (AP_None * L2_APMult) + L2_SmallPage ; R sup W sup
& (AP_ROM * L2_APMult) + L2_SmallPage ; R any W none
PPLTransX
& (AP_Full * L2X_APMult) + L2_ExtPage ; R any W any
& (AP_Read * L2X_APMult) + L2_ExtPage ; R any W sup
& (AP_None * L2X_APMult) + L2_ExtPage ; R sup W sup
& (AP_ROM * L2X_APMult) + L2_ExtPage ; R any W none
PPLAccess ; EL1EL0
; RWXRWX
GenPPLAccess 2_111111
GenPPLAccess 2_111101
GenPPLAccess 2_111000
GenPPLAccess 2_101101
DCD -1
PageShifts
= 12, 13, 0, 14 ; 1 2 3 4
= 0, 0, 0, 15 ; 5 6 7 8
LTORG
; +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
;
; "ARM600"-specific OS_MMUControl code
;
; in: r0 = 0 (reason code 0, for modify control register)
; r1 = EOR mask
; r2 = AND mask
;
; new control = ((old control AND r2) EOR r1)
;
; out: r1 = old value
; r2 = new value
MMUControl_ModifyControl ROUT
Push "r0,r3,r4,r5"
CMP r1,#0
CMPEQ r2,#&FFFFFFFF
BEQ MMUC_modcon_readonly
LDR r3,=ZeroPage
LDRB r5,[r3, #ProcessorArch]
PHPSEI r4 ; disable IRQs while we modify soft copy (and possibly switch caches off/on)
CMP r5,#ARMv4
LDRLO lr, [r3, #MMUControlSoftCopy]
ARM_read_control lr,HS ; if ARMv4 or later, we can read control reg. - trust this more than soft copy
AND r2, r2, lr
EOR r2, r2, r1
MOV r1, lr
STR r2, [r3, #MMUControlSoftCopy]
BIC lr, r2, r1 ; lr = bits going from 0->1
TST lr, #MMUC_C ; if cache turning on then flush cache before we do it
BEQ %FT05
ARMop Cache_InvalidateAll,,,r3 ; D-cache turning on, I-cache invalidate is either necessary (both turning on) or a safe side-effect
B %FT10
05
TST lr, #MMUC_I
ARMop IMB_Full,NE,,r3 ; I-cache turning on, Cache_InvalidateAll could be unsafe
10
BIC lr, r1, r2 ; lr = bits going from 1->0
TST lr, #MMUC_C ; if cache turning off then clean data cache first
BEQ %FT15
ARMop Cache_CleanAll,,,r3
15
ARM_write_control r2
BIC lr, r1, r2 ; lr = bits going from 1->0
TST lr, #MMUC_C ; if cache turning off then flush cache afterwards
BEQ %FT17
LDR r3,=ZeroPage
ARMop Cache_InvalidateAll,,,r3 ; D-cache turned off, can safely invalidate I+D
B %FT20
17
TST lr, #MMUC_I
BEQ %FT20
LDR r3,=ZeroPage
ARMop IMB_Full,,,r3 ; Only I-cache which turned off, clean D-cache & invalidate I-cache
20
PLP r4 ; restore IRQ state
Pull "r0,r3,r4,r5,pc"
MMUC_modcon_readonly
LDR r3, =ZeroPage
LDRB r5, [r3, #ProcessorArch]
CMP r5, #ARMv4
LDRLO lr, [r3, #MMUControlSoftCopy]
ARM_read_control lr,HS ; if ARMv4 or later, we can read control reg. - trust this more than soft copy
STRHS lr, [r3, #MMUControlSoftCopy]
MOV r1, lr
MOV r2, lr
Pull "r0,r3,r4,r5,pc"
; If extended pages are supported:
; PPLTrans should contain L2X_AP + L2_ExtPage
; PCBTrans should contain L2_C+L2_B+L2_TEX (for an extended page)
; If extended pages aren't supported:
; PPLTrans should contain L2_AP + L2_SmallPage
; PCBTrans should contain L2_C+L2_B
; In:
; r0 = phys addr (aligned)
; r1 = page flags:
; DynAreaFlags_APBits
; DynAreaFlags_NotBufferable
; DynAreaFlags_NotCacheable
; DynAreaFlags_CPBits
; PageFlags_TempUncacheableBits
; r2 -> PPLTrans
; r3 -> PCBTrans
; Out:
; r0 = PTE for 4K page ("small page" or "extended page" depending on PPLTrans)
Get4KPTE ROUT
Entry "r4"
AND lr, r1, #DynAreaFlags_APBits
LDR lr, [r2, lr, LSL #2]
; Insert AP bits, page type/size
ORR r0, r0, lr
; Insert CB+TEX bits
ASSERT DynAreaFlags_CPBits = 7*XCB_P :SHL: 10
ASSERT DynAreaFlags_NotCacheable = XCB_NC :SHL: 4
ASSERT DynAreaFlags_NotBufferable = XCB_NB :SHL: 4
TST r1, #PageFlags_TempUncacheableBits
AND r4, r1, #DynAreaFlags_NotCacheable + DynAreaFlags_NotBufferable
AND lr, r1, #DynAreaFlags_CPBits
ORRNE r4, r4, #DynAreaFlags_NotCacheable ; if temp uncache, set NC bit, ignore P
ORREQ r4, r4, lr, LSR #10-4 ; else use NC, NB and P bits
LDRB r4, [r3, r4, LSR #4] ; convert to X, C and B bits for this CPU
ORR r0, r0, r4
EXIT
; In:
; As per Get4KPTE
; Out:
; r0 = PTE for 64K page ("large page")
Get64KPTE ROUT
Entry "r4"
AND lr, r1, #DynAreaFlags_APBits
LDR lr, [r2, lr, LSL #2]
; Force to large page
ORR r0, r0, #L2_LargePage
; Insert AP bits
AND lr, lr, #L2X_AP ; If extended pages are supported, we need to expand L2X_AP to L2_AP
MOV r4, #L2_APMult/L2X_APMult
MLA r0, r4, lr, r0
50
; Insert CB+TEX bits
; Shared with Get1MPTE
ASSERT DynAreaFlags_CPBits = 7*XCB_P :SHL: 10
ASSERT DynAreaFlags_NotCacheable = XCB_NC :SHL: 4
ASSERT DynAreaFlags_NotBufferable = XCB_NB :SHL: 4
TST r1, #PageFlags_TempUncacheableBits
AND r4, r1, #DynAreaFlags_NotCacheable + DynAreaFlags_NotBufferable
AND lr, r1, #DynAreaFlags_CPBits
ORRNE r4, r4, #DynAreaFlags_NotCacheable ; if temp uncache, set NC bit, ignore P
ORREQ r4, r4, lr, LSR #10-4 ; else use NC, NB and P bits
LDRB r4, [r3, r4, LSR #4] ; convert to X, C and B bits for this CPU
; Move TEX field up
ORR r4, r4, r4, LSL #L2L_TEXShift-L2_TEXShift
BIC r4, r4, #L2_TEX :OR: ((L2_C+L2_B) :SHL: (L2L_TEXShift-L2_TEXShift))
ORR r0, r0, r4
EXIT
; In:
; As per Get4KPTE
; Out:
; r0 = PTE for 1M page ("section")
Get1MPTE
ALTENTRY
AND lr, r1, #DynAreaFlags_APBits
[ ARM6support
; Set U bit if cacheable and not ROM access
; (Because ROM access isn't supported, it'll get mapped to AP_Read.
; Writes to ROM will presumably be ignored by the bus, but if we have
; U set it will update the cache, effectively giving people the power
; to temporarily overwrite ROM)
CMP lr, #2
TSTLS r1, #DynAreaFlags_NotCacheable
ORREQ r0, r0, #L1_U
]
LDR lr, [r2, lr, LSL #2]
; Force to section map
ORR r0, r0, #L1_Section
; Insert AP bits
ASSERT L1_AP = L2X_AP :SHL: 6
AND lr, lr, #L2X_AP
ORR r0, r0, lr, LSL #6
; Insert CB+TEX bits
ASSERT L1_C = L2_C
ASSERT L1_B = L2_B
ASSERT L1_TEXShift = L2L_TEXShift
B %BT50
; In:
; r0 = L2PT entry
; Out:
; r0 = phys addr
; r1 = page flags
; or -1 if fault
; r2 = page size (bytes)
DecodeL2Entry ROUT
ANDS r2, r0, #3
MOVEQ r1, #-1
MOVEQ pc, lr
Entry "r3-r5"
; Get AP bits in low bits
ASSERT L2X_APMult = 1:SHL:4
MOV r1, r0, LSR #4
; Remap TEX+CB so that they're in the same position as an extended page entry
ASSERT L2_LargePage < L2_SmallPage
ASSERT L2_SmallPage < L2_ExtPage
CMP r2, #L2_SmallPage
AND r4, r0, #L2_C+L2_B
ANDLT lr, r0, #L2L_TEX
ORRLT r4, r4, lr, LSR #L2L_TEXShift-L2_TEXShift
ANDGT lr, r0, #L2_TEX
ORRGT r4, r4, lr
; Align phys addr to page size and set up R2
MOV r0, r0, LSR #12
BICLT r0, r0, #15
MOV r0, r0, LSL #12
MOVLT r2, #65536
MOVGE r2, #4096
20
; Common code shared with DecodeL1Entry
; Only four PPL possibilities, so just directly decode it
; ARM access goes 0 => all R/O, 1 => user none, 2 => user R/O, 3 => user R/W
; PPL access goes 0 => user R/W, 1 => user R/O, 2 => user none, 3 => all R/0
; i.e. just invert the bits
AND r1, r1, #3
LDR r3, =ZeroPage
EOR r1, r1, #3
; Search through PCBTrans for a match on TEX+CB
; Funny order is used so that NCNB is preferred over other variants (since NCNB is common fallback)
LDR r3, [r3, #MMU_PCBTrans]
MOV lr, #3
30
LDRB r5, [r3, lr]
CMP r5, r4
BEQ %FT40
TST lr, #2_11
SUBNE lr, lr, #1 ; loop goes 3,2,1,0,7,6,5,4,...,31,30,29,28
ADDEQ lr, lr, #7
TEQ lr, #35
BNE %BT30 ; Give up if end of table reached
40
; Decode index back into page flags
; n.b. temp uncache is ignored (no way we can differentiate between real uncached)
ASSERT DynAreaFlags_CPBits = 7*XCB_P :SHL: 10
ASSERT DynAreaFlags_NotCacheable = XCB_NC :SHL: 4
ASSERT DynAreaFlags_NotBufferable = XCB_NB :SHL: 4
AND r4, lr, #XCB_NC+XCB_NB
AND lr, lr, #7*XCB_P
ORR r1, r1, r4, LSL #4
ORR r1, r1, lr, LSL #10
EXIT
; In:
; r0 = L1PT entry
; Out:
; r0 = phys addr
; r1 = page flags if 1MB page
; or -1 if fault
; or -2 if page table ptr
DecodeL1Entry
ALTENTRY
AND r1, r0, #3
ASSERT L1_Fault < L1_Page
ASSERT L1_Page < L1_Section
CMP r1, #L1_Page
BGT %FT50
MOVLT r1, #-1
MOVEQ r1, #-2
MOVEQ r0, r0, LSR #10
MOVEQ r0, r0, LSL #10
EXIT
50
; Get AP bits in low bits
ASSERT L1_APMult = 1:SHL:10
MOV r1, r0, LSR #10
; Remap TEX+CB so that they're in the same position as an extended page entry
ASSERT L1_C = L2_C
ASSERT L1_B = L2_B
AND r4, r0, #L1_C+L1_B
AND lr, r0, #L1_TEX
ORR r4, r4, lr, LSR #L1_TEXShift-L2_TEXShift
; Align phys addr to page size
MOV r0, r0, LSR #20
MOV r0, r0, LSL #20
; Jump to common code to do AP decode + PCBTrans search
B %BT20
END