1. 06 Dec, 2014 2 commits
  2. 30 Oct, 2014 1 commit
  3. 25 Oct, 2014 1 commit
  4. 04 Sep, 2014 1 commit
    • Jeffrey Lee's avatar
      Add support for recent U-Boot versions · b619bcbf
      Jeffrey Lee authored
        - added further definitions (not listed in older TRMs)
        - configure all GPIO pads used by audio system
          (for supporting latest U-Boot 2014-7)
        - added overflow check for address range
        - added overflow check for address range
        - address comparison with unsigned arithmetic
        - added initialisation code and pad configuration for TWL6030 RTC
          (for supporting latest U-Boot 2014-07)
        - added pad configuration for LEDs used by SDIO
          (for supporting latest U-Boot 2014-07)
        - removed unused code parts
        - use defines for controller types
        - added pad configuration for DVI framer pin
        - enable DSS power and clock domain and DSS specific clocks
        - activate thermal sensor clock
        - wait for activated module in VideoDevice_Activate
          (for supporting latest U-Boot 2014-07)
        Submission from Willi Theiss
        Tested on Panda ES rev B3 (Willi), Panda rev A6 (myself)
      Version 0.36. Tagged as 'OMAP4-0_36'
  5. 20 Jul, 2014 1 commit
  6. 22 Apr, 2014 1 commit
    • Robert Sprowson's avatar
      Improvements to audio FIFOing · dd79dd09
      Robert Sprowson authored
      hdr/Audio: split AudioChannels to allow new AudioDMASize field to differentiate OMAP4430 v 4460.
      Audio.s: handle FIFO underflow events of the audio stream, differentiate FIFO sizes for OMAP4430 v 4460.
      SDMA.s: add prefetch flag in DMA control for audio channel
      Submission from Willi Theiss.
      Version 0.34. Tagged as 'OMAP4-0_34'
  7. 14 Apr, 2014 1 commit
  8. 23 Mar, 2014 1 commit
  9. 22 Mar, 2014 2 commits
  10. 09 Mar, 2014 1 commit
    • Robert Sprowson's avatar
      Rework of SDRAM detection · 6d2e5e8a
      Robert Sprowson authored
      hdr.SDRC: Extra bit fields added to definitions
      s.RAM: scan through all LISA_MAP register
             rework of clear loop (only one instance used)
      s.Boot: scan through all LISA_MAP register
      This should remove the dependence of the OMAP4 HAL to be run with a specific version of the accompanying loader.
      Submission from Willi Theiss. Built, but not tested here,
      Version 0.29. Tagged as 'OMAP4-0_29'
  11. 08 Mar, 2014 1 commit
    • Robert Sprowson's avatar
      Use DSB/ISB directly · 71b85f75
      Robert Sprowson authored
      Objasm 4 supports ARMv7 opcodes, and this HAL is only every for ARMv7.
      Built, but not tested. Submission from Willi Theiss.
      Version 0.28. Tagged as 'OMAP4-0_28'
  12. 15 Dec, 2013 1 commit
    • Jeffrey Lee's avatar
      Remove obsolete stub HAL video API implementation · 9ab43465
      Jeffrey Lee authored
        hdr/Video - Remove unused local VIDC list type 3 definition
        s/Boot, s/Video - Removed obsolete HAL video API implementation. A stub implementation is no longer required for systems that have a GraphicsV driver in a module, and can even cause problems if the OS decides to use the HAL implementation instead of the module one.
        Builds, but untested. Essentially the same changes as for the OMAP3 HAL.
        Requires Kernel-5_35-4_79_2_203
      Version 0.27. Tagged as 'OMAP4-0_27'
  13. 16 Nov, 2013 3 commits
  14. 12 Nov, 2013 1 commit
  15. 09 Nov, 2013 1 commit
  16. 01 Nov, 2013 1 commit
  17. 30 Oct, 2013 1 commit
    • Ben Avison's avatar
      Replaced header file for licensing reasons · 8ef181eb
      Ben Avison authored
        omap4_reg.h taken from FreeBSD projects/armv6/sys/arm/ti/omap4, trimmed to
        only include interrupt definitions, then updated so that symbol names and
        comments match Table 17.2 of the OMAP4460 TRM (SWPU235F) more closely - now
        the symbol names only differ in the prefix, and the absence of "IRQ"
        mid-string.  This was then translated very literally into objasm syntax to
        create hdr.omap4_reg, and used in place of hdr.irqs44xx.
        Builds OK
      Version 0.22. Tagged as 'OMAP4-0_22'
  18. 28 Sep, 2013 1 commit
  19. 21 Sep, 2013 1 commit
  20. 02 Sep, 2013 1 commit
  21. 01 Sep, 2013 2 commits
    • Robert Sprowson's avatar
      Whitespace changes · ff60f3e7
      Robert Sprowson authored
      Code and hashes lined up nicely.
      Not tagged.
    • Robert Sprowson's avatar
      Add support for all 4 I2C interfaces hdr.board support all 4 I2C interfaces... · cf16b564
      Robert Sprowson authored
      Add support for all 4 I2C interfaces hdr.board support all 4 I2C interfaces added BoardFlags variable remove unused BoardConfig_APLL_CTL variable hdr.StaticWS support all 4 I2C interfaces on OMAP4 board.s removed unused parameter apll_ctl added support for all 4 I2C and UART interfaces added BoardFlags variable
          support all 4 I2C interfaces
          some code tweaks (tidy up)
          removed unused Touchbook code
          support all 4 I2C interfaces
          some code cleanup and comment correction
      Submission from Willi Theiss.
      Version 0.19. Tagged as 'OMAP4-0_19'
  22. 17 Aug, 2013 1 commit
  23. 15 Aug, 2013 1 commit
  24. 13 Apr, 2013 1 commit
  25. 10 Apr, 2013 1 commit
    • Robert Sprowson's avatar
      Tidy ups to OMAP4 hdr.GPIO removed TWL/TPS pins (not available on... · 5052676f
      Robert Sprowson authored
      Tidy ups to OMAP4 hdr.GPIO removed TWL/TPS pins (not available on OMAP4/TWL6030) s.GPIO removed TWL/TPS related GPIO pins (not available on OMAP4/TWL6030) s.SDIO some code cleanup (remove OMAP3 specific stuff) s.Boot some code tweaks (tidy up)
      Changes from Willi Theiss. Built, but not tested here.
      Version 0.15. Tagged as 'OMAP4-0_15'
  26. 07 Apr, 2013 1 commit
    • Robert Sprowson's avatar
      Changes for OMAP4 HAL · f8acd505
      Robert Sprowson authored
      hdr/GPIO: aligned columns
      hdr/USB: added more USB related register definitions (OTG and USBPHY)
      hdr/Video: global variable for preventing multiple inclusion renamed to its original
      hdr/irqs44xx: interrupt numbers and naming according to latest OMAP44xx TRMs
      hdr/omap4430: address correction for L4_USBPHY
          changed recovering from error conditions
          disabled kludge for supporting non native samplerates (44.1 + 48k)
          removed unused function PRCM_GetFreqSel and related table
          aligned columns
          name change for OTG interrupt source
      Part of a number of changes from Willi Theiss.
      Build, but not tested.
      Version 0.14. Tagged as 'OMAP4-0_14'
  27. 22 Jan, 2013 1 commit
    • Jeffrey Lee's avatar
      Implement HAL_IRQMax · e198fedf
      Jeffrey Lee authored
        s/Boot, s/Interrupts - Added HAL_IRQMax implementation, to ensure correct functionality with latest Kernel
        Builds OK but untested at runtime
        Requires Kernel-5_35-4_79_2_182
      Version 0.13. Tagged as 'OMAP4-0_13'
  28. 09 Jul, 2012 1 commit
  29. 04 Jul, 2012 1 commit
    • Robert Sprowson's avatar
      Refactor HAL_VideoIICOp to be ATPCS · ec096f9e
      Robert Sprowson authored
      No longer specified to return _kernel_oserror * implements GraphicsV 14.
      Make use of IICStatus defines instead of local copies.
      Rename HAL_Video_ to HAL_Video.
      Compiles, but not tested.
      Version 0.11. Tagged as 'OMAP4-0_11'
  30. 03 Jul, 2012 1 commit
    • Ben Avison's avatar
      Added SD support for Pandaboard · 752d8b83
      Ben Avison authored
        SDHCI HAL device created. Also, Entry HAL_UARTDefault added (supports
        OS_SerialOp) and HALDoesVideo switch, previously disabled, is now removed.
        Requires SDIODriver 0.04.
        Changes received from Willi Theiss.
      Version 0.10. Tagged as 'OMAP4-0_10'
  31. 11 Jun, 2012 1 commit
    • Jeffrey Lee's avatar
      Fix HAL_UARTModemControl · a9f7850d
      Jeffrey Lee authored
        - HAL_UARTModemControl now uses the correct AND mask; previous code would have always had bit 0 of the mask set.
        - Fixed code in HAL_UARTModemControl that was testing for calls that don't update the register
        Builds, but untested
        Identical fix was tested in OMAP3 HAL
      Version 0.09. Tagged as 'OMAP4-0_09'
  32. 06 Jun, 2012 1 commit
    • Jeffrey Lee's avatar
      Sanitise HAL_USBControllerInfo · 23a21f07
      Jeffrey Lee authored
        s/USB - For valid controllers, HAL_USBControllerInfo now always returns the correct USB struct size and fills in the controller type. The rest of the buffer is filled in only if the supplied size is large enough. This allows for proper probing of controllers without knowing the required buffer sizes beforehand.
        Builds, but untested at runtime
        (Code identical to OMAP3 HAL anyway)
      Version 0.08. Tagged as 'OMAP4-0_08'
  33. 29 Apr, 2012 1 commit
  34. 25 Mar, 2012 2 commits
    • Robert Sprowson's avatar
      Bulk expand of tabs. · a4c0a9e8
      Robert Sprowson authored
      Helps to make tracking changes between OMAP3 and OMAP4 less eye watering, but otherwise functionally the same as 0.06.
      Version 0.07. Tagged as 'OMAP4-0_07'
    • Robert Sprowson's avatar
      Updates to OMAP4 port. · 67202e54
      Robert Sprowson authored
          changes for better sound support
          added DebugTiming macros
          added variable NVMemoryFound
          removed variables for NVRAM over SD card support
          changes for better sound support
          adjusted max pixel-clock rate
          added debug timing
          added debug timing
          EEPROM support over JTAG port (EMU0/EMU1)
          use DMA for copying ROM at top of RAM
          added debug timing
          support for compressed images (as in OMAP3)
          added debug timing OMAP4Dev.castle.RiscOS.Sources.HAL.OMAP4.c.CLib
          reverted to version without SD card NVRAM support
      Changes from Willi Theiss.
      Assembles without errors, but not tested here.
      Version 0.06. Tagged as 'OMAP4-0_06'