1. 13 Apr, 2012 1 commit
    • Ben Avison's avatar
      Minor bugfix to MiscOp 1 for '765 floppy disc driver · 138040d0
      Ben Avison authored
      Detail:
        If the sequence number did not have the expected value on entry (i.e. the
        caller had missed at least one state change) then the driver always reported
        Changed, even for floppy drives without a working disc changed line. This
        was the only time when Changed was reported for such drives - now it reports
        MaybeChanged in this case, which is consistent with the 1772 floppy driver.
        Also removed the confusingly-named (and unused) symbols DefectStruc and
        DefectCheck, in line with similar changes to SCSIFS and FileCore.
      Admin:
        Untested, but should be a safe change.
      
      Version 3.44. Tagged as 'ADFS-3_44'
      138040d0
  2. 21 Mar, 2012 1 commit
    • Ben Avison's avatar
      Retired FileCore_Create "No directory state" startup option · 61dadf8c
      Ben Avison authored
      Detail:
        Despite what the PRM says about *Configure options Dir and NoDir, the
        CMOS bit which they control was actually read by the filing systems and
        passed to FileCore via register R3 passed to FileCore_Create. In practice,
        only ADFS appears to have done this correctly. However, since RISC OS 3.00,
        FileCore has not managed the CSD (this function being taken over by
        FileSwitch) so this option hasn't actually done anything for the last
        21 years! Given that the other FileCore filing systems have managed fine
        without the Dir/NoDir option being set correctly, I think the time has come
        to stop using this part of the FileCore_Create API, which means we can free
        up a bit of CMOS.
      Admin:
        Builds but not tested, but a very low-risk change.
      
      Version 3.43. Tagged as 'ADFS-3_43'
      61dadf8c
  3. 19 Mar, 2012 1 commit
    • Ben Avison's avatar
      Reworked error code · 2720c90b
      Ben Avison authored
      Detail:
        Now uses Hdr:FileCoreErr rather than containing its own definitions of the
        low-level FileCore error numbers. Autogenerates and exports a new header,
        Hdr:ADFSErr, and a C version of the same, containing error definitions
        within the ADFS error block, derived from the error offsets from
        Hdr:FileCoreErr plus the ADFS-specific errors. s.AdfsErrors is now only
        used to list the errors for which an error block needs to be allocated for
        ADFS's own use.
      Admin:
        No changes to the binary.
      
      Version 3.42. Tagged as 'ADFS-3_42'
      2720c90b
  4. 14 Oct, 2011 1 commit
    • Robert Sprowson's avatar
      Update to use some of the exported FileCore headers. · 069303ab
      Robert Sprowson authored
      There are still a large number of local copies that should be visited, but this change at least allows it to assemble again FileCore-3_45.
      Tungsten and IOMD variants assemble, but others untested.
      
      Version 3.41. Tagged as 'ADFS-3_41'
      069303ab
  5. 07 Aug, 2011 1 commit
    • Jeffrey Lee's avatar
      Update to work with zero page relocation · 6589f4d7
      Jeffrey Lee authored
      Detail:
        s/ADFS, s/Adfs00, s/Adfs50 - Use OS_ReadSysInfo 6 to get ESC_Status location and store it in module workspace
        s/Adfs05 - Updated debug code to use OS_ReadSysInfo 6 to get IRQsema location. Updated CheckEscape to use local ESC_Status pointer, and updated it to only be compiled if it's actually needed
        s/Adfs10, s/Adfs14, s/Adfs15, s/Adfs17 - Use local ESC_Status pointer
      Admin:
        Tested (with low processor vectors) in Iyonix ROM softload
        Note that FIQ handlers haven't been updated to support high vectors, since they aren't currently used on any hardware capable of using high vectors
      
      
      Version 3.40. Tagged as 'ADFS-3_40'
      6589f4d7
  6. 18 Jul, 2011 1 commit
    • Jeffrey Lee's avatar
      Update IOMD HAL build to use OS_Memory 9 instead of HAL_ControllerAddress for... · fff2a575
      Jeffrey Lee authored
      Update IOMD HAL build to use OS_Memory 9 instead of HAL_ControllerAddress for finding the floppy controller
      
      Detail:
        s/Adfs19 - The (currently disabled) floppy code now uses OS_Memory 9 to look for controller 34 instead of the less-portable (and allocation clashing) HAL_ControllerAddress (to look for controller 6).
      Admin:
        Compiles but untested. IOMD floppy support is broken at the moment anyway.
      
      
      Version 3.39. Tagged as 'ADFS-3_39'
      fff2a575
  7. 22 Jun, 2011 1 commit
    • Jeffrey Lee's avatar
      IOMD/HAL build fixes · 013c01da
      Jeffrey Lee authored
      Detail:
        s/Adfs12 - Don't use DefaultIDEHardware in HAL builds, use the proper addresses instead
        s/Adfs19 - Make floppy code use HAL_ControllerAddress to get 82C710 address in non-PCI, non-Podule, HAL builds. However floppy code is currently disabled in this configuration because it hangs the machine when floppy access is attempted.
        s/Consts, s/StaticsIDE - Get rid of some bad address constants for HAL builds
      Admin:
        Tested in Iyonix & IOMD ROM softloads.
      
      
      Version 3.38. Tagged as 'ADFS-3_38'
      013c01da
  8. 06 Dec, 2010 1 commit
    • Ben Avison's avatar
      Reintroduced support for IOMD machines · a2d689f9
      Ben Avison authored
      Detail:
        There was no "Ver" file for Machine=32, and the code for build switch
        settings appropriate for IOMD had not been kept up-to-date with various
        changes to the module which were made to support Tungsten. This version
        provides working IDE support for IOMD HAL builds, although there are
        still some issues with floppy support. Tungsten builds should be
        functionally identical.
      Admin:
        Tested on a Risc PC. Joint development effort by Tom Walker and Ben Avison.
      
      Version 3.37. Tagged as 'ADFS-3_37'
      a2d689f9
  9. 19 Jan, 2010 1 commit
    • ROOL's avatar
      Incremented version number, no other change. · 63753fc1
      ROOL authored
      Previous changes were untagged, but incrementing the version number gives
      us a tag we can associate with the official RISC OS 5.16 release.
      
      Version 3.36. Tagged as 'ADFS-3_36'
      63753fc1
  10. 15 Jun, 2009 1 commit
    • Ben Avison's avatar
      Build change · d4ba6c08
      Ben Avison authored
      Detail:
        CPU version is no longer specified in the makefile - it's better to inherit
        it from the build environment now that we actually set it appropriately.
      Admin:
        Not tested. Binary should be unchanged - this only affects the warnings
        generated during assembly.
      
      Version 3.35. Not tagged
      d4ba6c08
  11. 11 Jun, 2009 1 commit
    • Ben Avison's avatar
      GET file pathnames changed · 451a6518
      Ben Avison authored
      Detail:
        Uses suffixed file extensions for compatiblity with both objasm and asasm.
      Admin:
        Supplied by Peter Naulls, tested at ROOL
      
      Version 3.35. Not tagged
      451a6518
  12. 03 Dec, 2003 1 commit
  13. 03 Apr, 2003 1 commit
    • Kevin Bracey's avatar
      * DMA support completed. · 664368e8
      Kevin Bracey authored
      * Selects PIO/DMA/Ultra DMA modes appropriate for each device.
      * DMA support added to ADFS_IDEUserOp, but not yet ADFS_ATAPIOp.
      * WinIDEMaxSectorsPerTransfer increased to 256.
      * Floppy driver reattaches to DMA Manager if it's reinitialised.
      
      Version 3.35. Tagged as 'ADFS-3_35'
      664368e8
  14. 28 Jan, 2003 1 commit
  15. 17 Jan, 2003 1 commit
    • Kevin Bracey's avatar
      * ADFS_DiscOp64 and ADFS_ATAPIOp added. · d980237a
      Kevin Bracey authored
      * New FileCore error passing scheme supported.
      * PCI floppy support functional.
      * 48-bit LBA support added for ADFS_IDEUserOp and accessing beyond the
        first 128GB of a drive - not thoroughly tested.
      * IDE autodetection improved
      
      Version 3.34. Tagged as 'ADFS-3_34'
      d980237a
  16. 18 Sep, 2002 1 commit
  17. 17 Nov, 2000 1 commit
    • Ben Avison's avatar
      Loading to/saving from top-bit-set addresses should now work. · 28968ea5
      Ben Avison authored
      Detail:
        The problem was in the API definition of the scatter lists used in
        background data transfer. These consist of a sequence of word pairs,
        holding addresses and lengths; any negative (ie top-bit-set) address word
        is defined to mean that the list continues at an location that is offset
        by that amount. To get around this, the check is now made not on whether
        the address word is negative, but on whether it is equal to or greater
        than (less negative than) &FFFF0000. This means that accesses to these
        addresses will still fail, but such addresses should be reserved for
        system use anyway.
      Admin:
        Tested briefly.
      
      Version 3.33. Tagged as 'ADFS-3_33'
      28968ea5
  18. 11 Jul, 2000 2 commits
    • Kevin Bracey's avatar
      Ursula_RiscPC branch merged. · 83c6bab3
      Kevin Bracey authored
      Detail:
        The Ursula_RiscPC branch contained version 3.30 of ADFS, which had
        minimal updates for Ursula, such as the service call table. This
        version, incorporating changes on the Ursula branch up to
        the Ursula_RiscPC_bp tag, is now merged on to the trunk as 3.32.
        This leaves version 3.31 on the Ursula branch, unmerged. This contains
        unfinished support for auto-detection of IDE drives and support for
        Phoebe hardware.
      
      Version 3.32. Tagged as 'ADFS-3_32'
      83c6bab3
    • Kevin Bracey's avatar
      created by srccommit. · eee8692b
      Kevin Bracey authored
      eee8692b
  19. 29 Oct, 1998 1 commit
  20. 09 May, 1997 1 commit
  21. 02 May, 1997 1 commit
  22. 01 May, 1997 2 commits
  23. 21 Jan, 1997 1 commit
  24. 06 Jan, 1997 1 commit
  25. 21 Nov, 1996 4 commits
  26. 05 Nov, 1996 3 commits